The wiring diagram and instruction how to replace the 4-pin with the 6-pin connectors are also further down in that thread. I am copying an excerpt from there but please take time to read the whole issue in the original thread.
Perhaps you need a pair of 6-pin connectors, try here
http://www.peachparts.com/shopforum/showthread.php?t=188612
Quote:
Courtesy of BENZ-LGB
Here is the wiring diagram for the Euro lights. Please note that this diagram is numbered as you are looking at the plug from the bottom (looking at the female ends). In my picture you are looking at the plug from the top
The new (blue) wire in my earlier picture (position #3 in the diagram) goes to the plug that is connected to the turn indicator assembly. You splice it to the grey/red wire there (there are only three wires going to the turn indicator assembly). That is step #2 in the diagram (what they refer to as the jumper wire). If you follow these steps all the lights should work and you shoul dnot get a "light out" warning.
|
__________________
1996 E320 since 1/16/08, 171K miles as of Feb 2011
---------------------------------------------------------
1989 300CE - R.I.P. Dec 29 2007
Other MBs (sold): 1992 300E-24 - 1979 350SLC - 1984 230E - 1990 300CE
Last edited by Texholdem; 06-30-2007 at 02:53 AM.
|