I'm not able to read the sensors.

The plan is to change oil and filter, and do the flushing.

So I was wondering if this is a typical fault, and maybe change some part at the same time as the oil change. Since the oil is so expensive.

I will also check for oil leaks in the connector.

Im not able to get 80 deg C on the gear box, I get 50-60 deg C and the oil level is not on max. Its just over halfe way, between min and max.

If this codes are related to the RPM sensors, I will get a new conductor board on warranty. But the MB star people dont understand my codes...;-)
Even if they are described in WIS.

So I will have it scanned with a MB scanner.
Dont know if they will change it on warranty, its a part warranty.

__________________
totx
Central South East Norway

90' 300 TDT 4-Matic Sold
91' 300 SL-24V Sold
99' E 220 T CDI Sold
00' E 220 T CDI