Quote:
Originally Posted by violinr
The 280slc drive shaft and Rubber is much smaller in diam. where it bolts to the tranny..I only have the larger 380 drive shaft...so I will have to find a drive shaft from a 6 cyl....Reggie
|
One place where you might luck out. It may be possible that 380SL and 280SL transmission flanges have interchangeable splines and seals. I kind of lucked out this way. In that I needed larger spline 3 lobe flange to mate with my 560SL 3 lobe drive shaft. Well the 560SL and SL600 flanges were not interchangeable however the SL500 3 lobe and SL600 4 lobe flanges were interchangeable. By using the SL500 flange on my SL600 transmission I could now mate the SL600 transmission to the 560SL.
http://www.peachparts.com/shopforum/showpost.php?p=1557719&postcount=54