From section 15-4000 -
Quote:
|
Turn the key in the steering lock to position "2"; the current consumption of each glow plug must be 8-15 amperes after 10-20 seconds. If the reading is higher than 15 amperes, renew the glow plug. If the reading is less than 8 amperes, test electric cable or plug for interruption.
|
From section 15-0705 -
Quote:
|
When the glow system is switched on, a current of approx. 30 amperes flows to each glow plug. The heating winding heats the glow plug very rapidly. The control winding increases its resistance as the temperature rises and limits the current to approximately 8-15 amperes. The glow plug is thus protected against overload.
|
I guess the strip fuse is a slow blow type.
Sixto
87 300D