I've had to pull out the ignition switch on my 1992 300D to replace the vacuum switch for the engine cutoff.

However, the plug S2/2 came apart and I don't know where the wires are supposed to go. Sheesh, what a pain. It's the wiring plug at the back of the ignition switch that connects all the wires to the ignition.

I've looked in the FSM and the ETM and haven't been able to find the colors of the wires in that plug and their positions. Searched on line too. Nothing, Nada, Niente, Niks, Zero.

Anybody maybe have a haynes manual and maybe they've got it in the there? There's 2 red wires, Green/Pink, Yellow/Pink. Picture attached. Or maybe you know where to find it in the FSM or ETM?

Grrr....

Attached Thumbnails

 

__________________
1983 240D Silver/Blue "Sadie", unknown miles. 100k miles on WVO single tank, converted to 2 tank about 10k miles ago, FPHE, Injector Heaters, Aux Fuel pump. Alcohol/Water injection. Frantz oil bypass filter
1992 300D 2.5 Turbo Green/Tan "Jade" 267K miles Stock.
1992 300D 2.5 tan/tan "Rocky" on 2 tank WVO. Pressure actuated Turbo "rat's nest" surgery completed. 197k miles