Quote:
Originally Posted by tinypanzer
To use the 5mm hex on that bottom bolt, you put the long end into the bolt head and use a small piece of pipe (I used a threaded lamp rod) to put on the short end and you get your torque back. Once you get it broken loose, you should be able to spin it out by hand. It helps if you push down the serpentine belt a little.
|
Actually, I accessed it from the side and broke it free and then stuck it through the fan blades and spun it out from the front and reversed it to re install.
I was able to find a set of wires for $30 at checker which included the metal boots. Not sure why you pay $100 for Bosch or Beru, just my 02.