Here's bgkast's post about the
GT2056V adapter to the stock manifold. This might help. Bryan probably has a better schematic or can elaborate more on this pic.
Quote:
Originally Posted by bgkast
This is how the current holes are set up:
Green - Pass through 8mm (for the 10mm ->8mm stud
Blue - Pass through 10 mm (will be counter sunk to fit a nut or allen head bolt)
Red - Threaded 10 mm (will receive bolts from back side of stock manifold, threaded holes in manifold will need to be bored out to pass through holes
Purple - Threaded 8mm (will have studs inserted to mount GT2056V)
|
