NEVER do any work under a car without jackstands!
I have the drivers side mount out right now.
Both sides are up on jackstands and I have a board under the oil pan and lift it up with a hydraulic jack.
Some preparation is needed.
The engine shocks & the longitudinal shaft needs to be disconnected.
That back bolt is a pita. I used an allen key and turned it 1/4 turn at a time. I did it from underneath. You can't see it you have to do it by feel.
Danny
__________________
1984 300SD Turbo Diesel 150,000 miles
OBK member #23
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination
|