I've purchased several window motors from Napa. For several different make/model vehicles. Most recently an 84 Ford Van, and a 97 Ford Crown Vic. Every time I get one from them I have to cut the wiring "Pig Tail", off the old motor, and crimp & heatshrink the wires with the electrical plug onto the new motor. This just seems to be standard proceedure for window motor replacement. I've never had one come through with the plug end ready to just plug in, so far. This I believe is due to the fact that so many manufacturers, make so many different design changes. Some changes are made more than once in the same year. The manufacturers buy parts from the lowest bidder, as long as it meets the specs they need. That could be the issue you are dealing with.

__________________
[SIGPIC][/SIGPIC]