View Single Post
  #4  
Old 12-21-2009, 09:42 PM
mak mak is offline
mark
 
Join Date: Jul 2006
Location: Westfeld .
Posts: 687
on my 300SE i had a problem with the right main beam ,it would go off after a while ,fuses and connector were checked all seemed fine but the problem persisted .
I replaced the fuse ,cleaned the contact areas and the problem was rectified.
After that i replaced all the fuses with the brass tip ones from a fuse kit.never had other intermittent problems including the fuel gauge .
mak
Reply With Quote