Quote:
Originally Posted by smacmoyle
Getting ready to do the delivery valve seals on the E300. Its stinking up the garage and making the wife cranky. Found a tool on ebay for 33 bucks. where is a good place to get the orings and crush washers ? i will change out some fuel lines also. do i just replace the original hard plastic lines with regular fuel hose and clamps ? Its got 156,000 on it. that seems to be the time they start leaking. already read the great DIY posted on this subject.
Grateful for any input
Scott
|
Watch out for the springs falling into the engine bay as you lift the lines off the pump. Other than that, take your time. Oh and make sure when you reattach the lines, that you wiggle things around so the valve is correctly seated. You don't want to torque down onto something that's stuck at the wrong angle.