|
Make your own cluster removal tool
I just made my own cluster removal tool out of a tent stake. I just took a couple of large channel-locks and bent about 1/2 inch on the straight end...slightly more than 90 degrees...that is the end to insert into the cluster. The other end is already bent and can be used for gripping your new tool! See attached picure
There are many posts here on how to remove the cluster once you have the tool. Good luck!!
BTW, I used this on my W210's (E300D), however it may also work on other models
__________________
1987 560SL - 95K
1996 E300D - 183K
1997 E300D - 162K
1982 240D - 160K
|