JimH,
This is what I am thinking. Where do you insert coat hanger to prop the damper door?
I removed the footwheel panel but could not see any damper/flap to pry open. I don't want to disassemble the center console ever again.
Thanks
Quote:
Originally Posted by Jim H
It's probably a broken plastic link to a driver's side damper door. My late, departed 300SDL did that, and I found it easier to prop the damper door open using a carefully bent coat hanger and pushing it up inside the plenum than to remove gawd-knows how much plenum to put on a new linkage. But then, my threshold of adventure was fairly low, and you may have better luck.
|
__________________
1987 300SDL 314K mi, counting; #22 Head 
1999 E300Turbo 405K original miles
1997 E320 180K mi (Son's)
2002 ML320 (Son's)
1998 S320 140K mi (Son's) sold
1985 300SD 311K mi
1984 300D 324K mi (killed by a hit-n-run turd)
*************************************
|