Quote:
Originally Posted by diametricalbenz
I am here at Winmutt's helping with the pedal and shifter assembly portion of the install and I can't figure out how to remove the fasteners that hold down the styrofoam behind the pedals without breaking it or ruining the styrofoam to route the master cylinder behind it (in yellow). The fasteners are in red and the hard line/hose section is routed through the hole (in blue) to the transmission. Is there an easy way to remove these without breaking them?
|
They're threaded but they'll also pull straight out, if you have an instrument cluster hook or similar tool just get it under the edge, give it a little tug, reposition to the opposite side and repeat, they usually come off pretty easily after some wiggling!