So... we know URO brand is not the best by any means. My first experience was with an upper control arm. Still installed since last late fall, but due to be replaced with all new front end this spring. During install the nuts provided stripped the ball joint stud so I had to use a second nut to secure things.

Then I had installed new manifold rubber hoses for the injectors. The manifolds were some German company and seem ok, but the crossover and feeder hose have collapsed. First the crossover that goes under the fuel dist. It collapsed and cracked open causing a rough idle. I had the old one to put back in. Then today I found the feeder, the ribbed one, has done the same.

Time to call the supplier and return. Glad I kept the old parts.

__________________
1991 560 SEL / 185k miles
1992 750il / 17k miles - project car