PeachParts Mercedes-Benz Forum - View Single Post - Need to confirm socket size for 95 E300D injection nozzles

kickit · #1 05-08-2011, 07:52 PM

I'm going a little nuts. My service manual and numerous posts point to the injection nozzles on my 606.910 engine requires a deep 22mm socket with the side cut out so as to not damage the return line hose barbs.

The thing is I cannot even get a 22mm socket past the top of the injector holder?

From what I can measure deep down in the well, it looks like the holder hex is more like 27mm.

I'm attaching a pdf picture if it helps. Sorry the depth of field is really hard to capture.

Has anyone with a 606 engine found that they needed a larger socket to remove the injector holder?

Thanks for your help ahead of time.