View Single Post
  #4  
Old 05-27-2011, 02:14 PM
whunter's Avatar
whunter whunter is offline
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,434
Question

Quote:
Originally Posted by hpmguy View Post
Hello All,

New to the forum, and to diesels. I am researching the best year OM617 for a swap into a Toyota land cruiser, and here is what I have found so far:

This engine was offered (in the US) in the 300SD models from '79 to '85, and the model number for these engines ranged from the OM617.950 - .952.

It seems that the .951/.952 engines are almost identical, but the .950 (offered in '79 only?) has 10 less HP.

What is the difference in the .950 and the .951/.952?

Are parts equally available for all models?

I have read that the '79 is the only model imported without EGR (Exhaust Gas Recirculator?), is this an advantage or disadvantage?

I was originally looking for a late model ('84/'85) but am having a hard time finding a suitable donor with reasonable miles on it. I have located a '79 with low miles close to me, but don't want to buy something that is inferior to the later models, or will have a problem with parts supply etc.

Recomendations please???

I appreciate your input, and thanks for your time!

-Guy
What state are you in?



.
__________________
ASE Master Mechanic

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D

https://www.boldegoist.com/
Reply With Quote