Quote:
Originally Posted by DeliveryValve
Brian, the upper nut is stamped in the washer that part of the bushing. You'll need a 22mm socket to get it out. There is not much there to grab, it is about 3mm tall. I always wondered how the rust belt cars would fair with that shallow of a nut.
.
|
Richard, you're a champ.
On the passenger side, there is no possibility of getting a 22mm socket over that bushing. The sheet metal over that area is way too close.
I suppose I'll try a 22 mm open end wrench. Even a box wrench won't make it to the far side.
The driver side has considerably more access.
I sure hope I can save that bushing............can you believe a new one is $70...........
