Quote:
Originally Posted by Phillytwotank
I'm in process of my own injector rebuild
Should I be concerned with small amounts of crud falling in when I pulled the injectors out??
|
Let me tell you what happens in real world.
1) It is inevitable that 'something' will fall into the pre-chamber when you pull the injectors. When you give it to a shop then they would care less and just pull the injector. When I do it myself then I will clean the injector base and use compress air to blow any debris away to minimize the risk.
2) Any minute crud or debris that falls into the pre-chamber probably will be burn off over time. So there is really nothing to worry about unless you drop a small screw driver or nut/bolt in there.
3) I would plug the holes with a rag once the injectors are out.
Have fun.