Quote:
Originally Posted by Gilly
I believe you do have to pull the pan to disconnect the cable inside the trans, wish I was more certain but has been awhile.
On the cable side, I think it is just one vac line? This would be for the upshift delay solenoid.
The one on the drivers side is for the vacuum modulator. make sense?
|
Yes I have one from the vacuum modulator to manifold but I also have two from pressure cable first one goes to a electric solenoid must be like you say upshift delay solenoid. The other one goes to the firewall and are connected to the yellow plastic thing that I don't now the name on. I just find it in the ATSG manual how to disconnect the cable I just lift up slightly the plastic housing and disconnect the wire if I got it right it's not always easy to understand the manual.