Quote:
Originally Posted by burntcloth
How hard is it to remove a transmission at a pick & pull without experience? What tools are required & how long would it take?
Thanks,
m
|
If you have no experience pulling one --ide find an experienced guy to help--- The flywheel to torque converter bolts are strangely hidden in a "window" at the rear of the oil pan casting-- But the real Muthu frrr is the starter bolts you should just take a 18 volt cordless drill and 1.5 " hole saw and cut a big acess hole to get at the bolts from the passenger side tranz tunnel.--you have to rip out the console and trim and the ps plastic ducting running along down the trans tunnel side and across the floorboard. or just buy my primo condition 722 303 from the 83
part car.