Any ideas on fixing or replacing the connectors at the ends of the wires? I got three that the wires broke off the connector end. these are the ones that just slide over the smooth posts on various engine sensors. The metal part is just a smooth "tube" and the plastic housing has a little tooth that hooks onto the edge or the sensors to hold it on. The wires have actually broken off right at the metal part.

short of trying to re-solder the wire back to the metal tube...has anyone found a good replacment option?

The plastic parts have all broken apart too.

Too bad the sensors done have "screw" posts with a nut...

__________________
1987 300TDT
1981 VW MKI Caddy 1.6 diesel, waiting on engine swap
1983 D-50 Power Ram 4x4 "Mitsubishi" 2.3 turbo diesel
assorted gas powered crap and motorcycles

RIP: 1984 300TDT, 1982 300TDT, 1984 190D 2.2, 1992 300D 2.5, 1987 300TDT, 1982 Maxima LD28, 1983 Maxima LD28, Isuzu C223 P'ups X3, 1983 Holiday Rambler 6.2 Banks turbo diesel, 1984 Winnebago LeSharo 2.1 TD, 1985 Allegro 6.5