Thread: Proper inst'l of Lower control arm bushing (124)?
View Single Post
  #4  
Old 04-30-2000, 08:34 AM
mbdoc mbdoc is offline
Moderator
  
Join Date: Mar 1999
Location: Tucker, Ga USA
Posts: 12,153
The reason the bushings are marked is that they have different "hardness" for front & rear bushings. You will know if there is a problem, shake, rattle, & roll. Plus the fronts are installed at different position than rears.

[This message has been edited by M.B.DOC (edited 04-30-2000).]
Reply With Quote