Quote:
Originally Posted by LandYaghtLover
So... we know URO brand is not the best by any means. My first experience was with an upper control arm. Still installed since last late fall, but due to be replaced with all new front end this spring. During install the nuts provided stripped the ball joint stud so I had to use a second nut to secure things.
Then I had installed new manifold rubber hoses for the injectors. The manifolds were some German company and seem ok, but the crossover and feeder hose have collapsed. First the crossover that goes under the fuel dist. It collapsed and cracked open causing a rough idle. I had the old one to put back in. Then today I found the feeder, the ribbed one, has done the same.
Time to call the supplier and return. Glad I kept the old parts.
|
May be if you would have used and Amex to buy them you might have had a claim against the seller?   Just saying.
__________________
Sent from an agnostic abacus
2014 C250 21,XXX my new DD ** 2013 GLK 350 18,000 Wife's new DD**
- With out god, life is everything.
- God is an ever receding pocket of scientific ignorance that's getting smaller and smaller as time moves on..." Neil DeGrasse Tyson
- You can pray for me, I'll think for you.
- When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.
|