Add a dab of Anti-Seiz compound to the threads before screwing on the MB lines.

I made lines similar to Mach4. I cut the crimps off the metal end at the Cooler, and then had AN fittings welded on, and had AN fitting welded onto the pipe ends like Mach4 shows.

I used Parker Push-Loc hoses.

I like the way Mach4 did his Oil Cooler end better than the way I did it, but both work the same. His has a much cleaner look than mine with the curved pipe.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works