I recently measured the bolt holes on the bell housing on a 722.112 automatic transmission for someone on BW =>

Droolworthy? 5-Speed For Your Diesel - Page 2 - Benzworld.org - Mercedes-Benz Discussion Forum

This might help someone looking for similar information here.


The dimensions are =>

A-H => 9cm
G-B => 20.5cm
F-C => 17.5cm
E-D => 15.25cm
D-H => 22.8cm
E-A => 23.8cm
D-G => 19.8cm
E-G => 10.5cm
D-B => 11.5cm
E-B => 22cm

All measurements made with a tape measure. All measurements made from a subjective centre of bolt hole!

The vent is at the top of the transmission (just in case you were wondering)

Attached Thumbnails

 

__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!