Quote:
Originally Posted by JB3
hows the passenger rear wheel arch?
I need this piece in a patch panel- attached image
EDIT- to clarify, the second pic shows a mirror of what I need for the passenger side. I cut this from a good driver side-
|
Per our phone conversation, here are a bunch of clarification pics of the repair piece I need-
so from the inside, would be the reverse of this-
I think if you just go angle down slightly from about this position outside, with a sawsall you could get both the inner and outer fenders-
approximately the line you would follow-
this is the inner support structure you want to avoid (sawsall might just zip through this though)-
gets a little more complex here, but easier to cut. I have horribly labeled O for a cut from outside, T for a cut that can be done from inside the trunk, and U for a cut from underneath-
