Quote:
Originally Posted by jcmoyer2004
Graham, does that piece snap on to a ball type thing? I noticed that I'm missing something on the driver side that snaps on to a ball and goes gown towards the hub. If this is the piece I need, what is it called, how much do they run and where can I get a set so I can go ahead and replace the other one. Thanks for the help
|
At the factory:
The plastic rod and boots snap onto the metal balls using a high speed 20 ton jig and press machine.
They are trash if:
* The boots are damaged.
* The boots are leaking corrosion.
* The boots are missing.
* The plastic link is damaged.
* The plastic link is broken.
* The plastic link is missing.
The only part reused is the nut/washer holding it to the sway bar.
.
__________________
ASE Master Mechanic
Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer
1985 300SD
1983 300D
https://www.boldegoist.com/