If you haven't already done so, turn the engine clockwise (only) until the timing indicator is at 15 deg. ATDC. Install the injection pump locking tool on the pump and then install the pump on the engine.
Now, the problem is you can't turn the engine when the pump is out of it so this may create extra work as you'll have to reinstall on of the pumps.
__________________
-Evan
Benz Fleet:
1968 UNIMOG 404.114
1998 E300
2008 E63
Non-Benz Fleet:
1992 Aerostar
1993 MR2
2000 F250
Last edited by KarTek; 07-16-2014 at 06:41 PM.
|