Quote:
Originally Posted by Rob Armstrong
The conductor plate was done last summer by previous owner.
The plug IS leaking but have read if it is the cause will most likely throw a code.
|
A leak by it's self won't trigger a code as the trans computer has no way of knowing there is a leak.
Quote:
Originally Posted by Rob Armstrong
I bet I need the under hood plug to use a scan tool to see if it's in gear?
|
Yes, for that year, the 38 pin underhood plug gives full access to the trans computer. You might get some trans data through the engine computer using the under dash OBD 2 connector but it might be limited..
Quote:
Originally Posted by Rob Armstrong
I will order a new one anyway as it needs to be replaced and start there.
I have symptoms of the shifter though. Hits hard when selecting a gear like a broken trans. That's what I have read.
|
When in limp mode, line pressure goes high as a fail safe, this will give a bang
Quote:
Originally Posted by Rob Armstrong
I apreaciate the help.
Love the car just want it to work properly.
|
There are many issues that can cause the trans to go into limp so reading codes / live data is vital.