Here's what I had on the seats (from the BW 210 forum):
Quote:
1.) Recline the chair DOWN all the way (flat position) and keep the recline button held down, in that direction, for an extra 5 seconds.
Don't interrupt the process, keep the button held down until you'll hear "click" sound from the switch. It's mean's you reset the stop position for flat position.
Note: you must do in quiet environment to hear "click" sound
reclining from the upright stop to the flat stop without interruption (until hear "click" sound) allows the motor to count revolutions from flat position, so you can restore stop point for upright position.
2.) Recline the chair UP all the way (upright position) and keep the recline button held down, in that direction, for an extra 5 seconds.
Voila! you already reset reclining stop position.
|