Quote:
Originally Posted by vstech
Is there a previous statement that tells you to set the motor to TDC compression stroke prior to beginning cam removal? Otherwise, the bolt sequence isn't going to apply much... The reason for the sequence is some lobes are under tension and THOSE lobes need gradual loosening of the bolts.
|
Yes the motor needs to be (& is) set to TDC compression stroke. I understand the lobes under tension needing gradual loosening. Just don't understand why the FSM instructions (pic) referring to the arrows as "light" & "dark" as they appear opposite i.e. instructions says 1, 5, & 6 are "dark arrows" when the accompanying photo shows them as light or no color fill.
I am standing at the ready to start removing the bearing caps.... Any thoughts?