Quote:
Originally Posted by JamesDean
As far as I can recall the W126 sender unit is built into the W126's transmission harness. It bolts into the tail shaft housing on the transmission. There is a special gear in there that is read by the sender. So you would have to swap tail shaft housings reverting back to the W126 unit and then plug in the sender unit that (hopefully) is still on your transmission harness.
|
Please disregard my previous post where I said the sensor is on the differential. Turns out I was thinking of the ABS sensor not the speed sensor. I went through all of that several years back in this thread here:
http://www.peachparts.com/shopforum/tech-help/285958-my-differential-fell-out-while-driving-w126-2.html
At any rate, that's what I was remembering not the speedo sensor. Sorry for the bad info.
__________________
-tp
1990 300SE "Corinne"- 145k daily driver - street modified differential - PARTING OUT OR SELLING SOON - PORTLAND OR. AREA - PM ME FOR DETAILS
1988 560SEL "Gunther"- 190K passes anything except a gas station
1997 S420 - 265k just bought it with a rebuilt trans. Lovely condition
|