Quote:
Originally Posted by otto huber
Yesterday I picked up an air box at the PnP from a '85 300SD with all of the necessary hoses and brackets. The only hang up that I see is modifying or replacing the hose that goes from the turbo inlet to the box. You can't really cut it because there won't be a flat surface left for a clamp to grasp. Is there a stiff, yet flexible hose that custom shops use that I could purchase and do the necessary modifications on? Thanks
|
I had installed an '85 fender mounted air box in 'Rena 2.0', which I saved before she went to the crusher.
See the attached photo.
There is a flexible ribbed rubber hose that goes from the bottom of the air box to the turbo inlet.
I believe its part number is 603 094 07 82. It should fit without modification.
I can easily retrieve the used hose, and would be willling to lend it to you so you could test fit it, if you wish.
I work close by in Oakland.