Quote:
Originally Posted by Idle
Look for 000 295 52 06. This looks like the photo you posted.
By the way, the slave cylinder is located on the transmission. The clutch master cylinder is located under the dash or on the firewall.
|
\
Thanks I think that's correct : ( your number )
This one also CENTRIC 13635003 $105
Yes I know where they are located lol The photo is on my car lol
Turns Out was just the Slave Cylinder fixed it installed it an hour ago bled the system from the Drivers Side Front Brake Caliper bleeder attached to slave Bleeder motor running ( Power Brakes ) Clutch Cylinder : I used a FTE Brand KN2596B1 Germany
6 Feet of 3/16th clear tubing Clamped tight to Bleeders so they don't pop off under pressure .
I watched the Air come out the Fluid reservoir but continued 3 extra Pumps.
You need to be sure you close Bleeders Before trying the Clutch
Its a a Little different to blead that way but simple . Is a Reverse Blead
You Can use the master Cylinder as a reservoir if you Glue in an outlet for fluid
( I mention this because a 53 year old Clutch reservoir often leaks )
Photo is a CENTRIC 13635003 Clutch Master cylinder
( Note : Most Likely I could have just tore it down " Easy " and change the rubber Cup on the Slave Cylinder I removed . Most often the size is marked on them or you can just measure and Match it up at some auto parts store )