|
You need to run the engine because the fan runs off the pulleys. No moving pulleys and no moving fan! You may not be able to really here the clutch engage either if the fan is not free spinning. It will just lock. Also the temp switch actually just connects the ground on the fan clutch when it reaches temp. There is power from somewhere else alreay at the clutch! So to test properly start the car and jump the two wires at the fan temp switch!
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.
1986 190E 2.3 Black, Auto, Mods to come soon.....
|