Quote:
|
Originally Posted by ozzy
104 engine, from 1994 on, use a tensioning device with internal dampner.
Use a breaker bar and socket (15mm i think?) fit onto tensioner pully and rotate clockwise, remove belt.
you will need to remove power steering pump and swing it to the side.
bolts are 6mm internal hex. good luck  |
Just reread your post. Are you saying after I loosen the locking nut and turn the adjuster rod to use your technique above?
Thanks
__________________
Brandon
2008 S550
1957 Dodge D100
1967 VW Microbus 21 Window
2001 Suburban
2004 Beach cruiser bicycle
-----------------GO DUKE!-----------------
"It cannot be emphasized too strongly or too often that this great nation was founded not by religionists, but by Christians; not on religion, but on the Gospel of Jesus Christ. For that reason alone, people of other faiths have been afforded freedom of worship here." Patrick Henry 1776
|