Thanks Guys -
The shop manual is pretty vague and superficial in its treatment of this miserable job. I have the booster/Master Cyl assy off and am working on unhooking the wiring bundles that run forward - I think they are my best hope for getting the slack needed to move the entire fuse box up far enough to clear a path for the sway bar. Otherwise it will be the nightmare of pulling wires from under the dashboard. The front sway bar must be the first component installed after the body was assembled... I will take digital pictures and make drawings/diagrams as I unhook wires & plugs - roger the potential for electrical gremlins that I don't need. At least the expansion valve isn't buried under the dash. Thanks, Mack