I should I hope be able to get that today if i can figure out just what he wants, if it is a trailing arm shipping is gonna cost a few bucks and depending how hard it is to remove could cost as much as $50 + shipping do you still want it? PS it was 100 degrees at the yard yesterdat.

Don't forget a 126 A/C condensor and fan.

ADD - gas pedal for my 300SD. Mine os broken at the floor.

How about the driver floor mat for the 126 300SD? The lowest one with the foam.

__________________
Michael LaFleur

'05 E320 CDI - 86,000 miles
'86 300SDL - 360,000 miles
'85 300SD - 150,000 miles (sold)
'89 190D - 120,000 miles (sold)
'85 300SD - 317,000 miles (sold)
'98 ML320 - 270,000 miles (sold)
'75 300D - 170,000 miles (sold)
'83 Harley Davidson FLTC (Broken again) :-(
'61 Plymouth Valiant - 60k mikes
2004 Papillon (Oliver)
2005 Tzitzu (Griffon)
2009 Welsh Corgi (Buba)

I need a set of palimino floor mats for my 300td. 300d and 300sd mats would work as well. Front only if possible.

Thank you

Cheers,

Bill

If you can get the rear chrome/black trim piece from the trunk of a w123, great.
If there's a 300TD anywhere near there, one off a wagon hatch would be better. The wagon hatch ones are apparently connected w/ plugs on the ends and screws in the middle.
Please be careful, they bend/crease easily. I need one in perfect shape.

If there is a "tan" w123 passenger side visor w/ light., also great.

__________________
85' 300D No inspection, No registration fees, Cheap insurance
"If my calculations are correct, when this baby hits 88 miles per hour, you're going to see some serious %$&^."

I broke a tooth and I Am miserable right now. I will try to figure who gets what and the cost. Then tomorrow or the next day I will get back with you about your parts. Hunting was not real great the transmission got stuck we had no jacks it took way too long to get it out. There were tons of 240d and na300d’s. But not many 5cyl turbo charged models, and the few they had were stripped this is the worst sale they have ever had. Plus it was about 100 degrees
Dave San Jose Ca

I need, in addition to the floor mats, a cruise control amplifier.

I've got a 300td but any 300 series will fit.

Thanks again and take care of that tooth

Cheers,

Bill

No, not the trailing arm, , what I want is the hub that the the rotor rides on - mine has somehow come out of round, and my rotor won't sit squarely on it. If it can't come fairly easily as a separate piece, don't worry about it, because shipping would eat up the cost savings. But thanks for all you're doing.

__________________
Tjohn

82 300 SD
77 450 SL (gone)

I need a driver's side front turn signal assembly for a w126. I sent you an email.

Thanks, Rob

__________________
Rob
'84 300SD 258K
'85 300D (sold)

Can you get me the drivers rear tail light assembly for a W123?

__________________
Frank
84 500SEL EURO 101K ( JUST LIKE MY 1ST WIFE. GLAD TO GET RID OF HER! )
85 300D 310K (sold)
90 350SDL 184K sold
83 300D 118K (sold)
88 300E 153k (sold)
93 400E 105K (sold)

I need an air cleaner housing...the one pictured on the left...84Cali/85 Fed style

http://www.meimann.com/images/mercedes/W123_stuff/W123_air_cleaners.jpg

__________________
1987 300TDT
1981 VW MKI Caddy 1.6 diesel, waiting on engine swap
1983 D-50 Power Ram 4x4 "Mitsubishi" 2.3 turbo diesel
assorted gas powered crap and motorcycles

RIP: 1984 300TDT, 1982 300TDT, 1984 190D 2.2, 1992 300D 2.5, 1987 300TDT, 1982 Maxima LD28, 1983 Maxima LD28, Isuzu C223 P'ups X3, 1983 Holiday Rambler 6.2 Banks turbo diesel, 1984 Winnebago LeSharo 2.1 TD, 1985 Allegro 6.5

Dave, you need to empty your PM box.
Any chance there's a nice black dash for a W123. I also need a couple of tailight electrical plugs.
PM or email me. Thanks!

__________________
DJ


84 300D Turbodiesel 190K with 4 speed manual sold in 03/2012

I need a horn, 500 Hz (not the 400 Hz), PN 004 542 36 20.

__________________
95 E320 Cabriolet, 159K

I just finished cleaning out my regular mailbox tomorrow I start on shop talk mail box after I finish testing parts I got. PS remind me never to do this again it got a little out of hand !!!!!

Are you still sending bits about?

Hey, I need one of the bolts that fastens the top of the oil filter housing on a 1985 w123 (it may be common to most or all Mercedes of that era, I don't really know), and one of the short bolts that holds on the bottom of the oil pan. Also floor mats? New window switch/module for the front console? And I'd love a new seat box for the drivers' side, but it sounds like you don't want to mess with the seats.

Heh.

If one of the 240D engine is a parts engine,I could use the crank out of one of them.