|
|
|
#1
|
||||
|
||||
OM603 Engine Mounts Good, Medium, Bad.
1987 300SDL engine mounts OM603
These where changed today and where too perfect of a DIY picture to resist. Can you tell which is Good, Medium or Bad? :EDIT: Went through and reset color and light level.
__________________
ASE Master Mechanic asemastermechanic@juno.com Prototype R&D/testing: Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician. Noise Vibration and Harshness (NVH). Dynamometer. Heat exchanger durability. HV-A/C Climate Control. Vehicle build. Fleet Durability Technical Quality Auditor. Automotive Technical Writer 1985 300SD 1983 300D 1984 190D 2003 Volvo V70 2002 Honda Civic https://www.boldegoist.com/ Last edited by whunter; 03-17-2005 at 12:45 AM. |
#2
|
||||
|
||||
I can only make out the mount in center pic. Let me guess that one came off the left side?
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#3
|
|||
|
|||
Yikes that's what I call a set of worn mounts.!!
Out of interest, how bad was the vibration in the car with the old mounts? New mounts are on my "to do" list as I have no idea if or when mine were changed. Vibration isn't terrible but is noticable particularly at idle.
__________________
1991 M-B 560SEL Arctic White/Grey 99,000 Miles 1987 M-B 300SDL Ivory/Palomino 229,000 Miles (sold but never forgotten) 2006 Volvo XC70 Blue/Beige 1999 Porsche Boxster Arena Red/Savanna Beige 1986 Porsche 928S Goldweiss/Brown |
#4
|
||||
|
||||
Terrible
Quote:
|
#5
|
||||
|
||||
Yep that sounds about right, the passengers side mount gets the most abuse. I think the engine is tilted to the left a few degrees.
I ment the passengers side mount in my first post; left looking at the engine.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#6
|
||||
|
||||
too perfect!
thanks for sharing.
the sound and feel when they are completely shot is just unbelievalbe!... and impossible to picture if never experienced. tom w
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#7
|
|||
|
|||
You know when one or both engine mounts are bad upon first cold ambient temps!
Scenario: Upon start up, mid to high 30's, you will likely hear and feel vibration until the engine has been fully warmed up. After warm up, vibration becomes less and you think to yourself OK, time for engine mounts, and you put it off, and put it off, then one cold sunny Saturday morning you are on your back looking up! Engine mounts for the 603 are very easy to replace! I use a small bottle jack and find a good place to lift the engine, not the bottom of the oil pan....unless you want to risk cracking the molded aluminum! |
#8
|
|||
|
|||
Quote:
__________________
1987 300SDL 167k 1992 Volvo 740 140k 1990 Volvo 740 250k 1989 Volvo 240 269k Anyone want to trade an old Volvo for an '87 300sdl? |
#9
|
||||
|
||||
Ha, my mount is worse than that... mine is gone. The motor rests on the frame. The incorrect fuel lines and leaking PS hose (in addition to the missing shield) caused the demise seen.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#10
|
||||
|
||||
Quote:
I jacked mine up from the oil pan, just use a good block of wood to spread the load. Hit Man X that prefilter is off of an SD. Get the straight type and it will fit better.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#11
|
||||
|
||||
Oh yes, I noticed that a while back... wrong filter and fuel hose. Great PO's
I just wish I could find the exact size fuel lines I need.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#12
|
||||
|
||||
I used 5/16. Bought a few feet and eyeballed the length, works fine.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#13
|
||||
|
||||
Any pics of the area where that fuel filter goes? I'm trying to see how bad that area is on my car...
Thanks!
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG] |
#14
|
||||
|
||||
Maybe, I don't have a digital camra. But I am trying to hook up with a friend tomarrow who does.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#15
|
|||
|
|||
Speaking of bad engine mounts...
Is it a bad thing when the passenger side engine mount has lost it's main 10mm allen socket bolt?
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Intermittent clanging noise a result of bad engine shocks/motor mounts? | 1983 300TD | Diesel Discussion | 3 | 08-17-2004 04:16 PM |
How to tell if an engine is any good | roberth58 | Diesel Discussion | 9 | 03-09-2003 08:13 PM |
1982 300D FOR SALE (bad engine) | Aaron | Mercedes-Benz Cars For Sale | 0 | 01-26-2003 05:53 PM |
Replaced engine mounts & shocks but engine vibrates louder. What cause(s)? | simon288 | Diesel Discussion | 5 | 12-10-2002 02:05 PM |
engine mounts good or bad | stevepeck | Tech Help | 4 | 08-04-2000 10:20 PM |