I have installed a new modulator valve for the transmission on the 1982 300D-Turbo Diesel that I rebuilt last summer. The valve was the green one-part No.126 270 26 79. What I need to know is,what size banjo fitting and what size hollow screw will I need. Also at what pressure should the valve be set, and at what RPM..
The car runs good, but sometimes the trans will 'flair'(engine races)between 2nd and 3rd gears and sometimes between 3rd and 4th. After getting into gear there is no slippage...
All help will be appreciated.
Bill Lewallen; Lexington,Ky. Home of The Rolex Three Day Event...