Are there any spots I should oil or otherwise treat? Thanks!

__________________
1989 300E 144K

I give the bearings/bushings a little shot of ATF.

__________________


1985 Euro 240D 5 spd 140K
1979 240D 5 spd, 40K on engine rebuild
1994 Dodge/Cummins, 5 spd, 121K
1964 Allice Chalmers D15 tractor
2014 Kubota L3800 tractor
1964 VW bug

"Lifes too short to drive a boring car"

A drop or two of ATF on the bearings would not hurt.

Jim

__________________
14 E250 BlueTEC black. 45k miles
95 E320 Cabriolet Emerald green 66k miles
94 E320 Cabriolet Emerald green 152k miles
85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles

I think I might even pull a pictorial on this one. I don't remember ever seeing one, and this seems to be a common problem.

__________________
1989 300E 144K

Have you taken any pics yet? I still haven't gotten to my blower motor yet and would love to get a visual before I get in there.

Thanks,

Alex
85 300sd 222k

what kind of pics do you need? I just got through replacing the blower in my SD and it was SOOO simple. worst part was getting that blower cage off the shaft... MAN you have to hit it hard! use a flashlight, make sure you get all the screws out of the blower case before you pull the bottom out, and pry the two front clips off the cover before you try to pull down the door.
I ended up getting a complete blower assembly... the bearings in both my parts cars were two far gone for repair.
I will oil the thing every year from now on! I don't want to EVER have to do that again.

__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 560SL convertible
1987 190D 2.5-5SPEED!!!

1987 300TD
2005 Dodge Sprinter 2500 158"WB
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!