Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-09-2008, 11:52 PM
Registered User
 
Join Date: Nov 2008
Location: Stuart, FL
Posts: 110
Did a bunch of work today, only one issue

So, I replaced all 4 shocks, brake pads, calipers, rotors and front brake lines and front wheel bearings.

Only issue was on the way to do the work the front end started wandering really bad, when I got to the house and put her up on the stands I noticed the upper control arm, outer bushing bolt had backed out, lost one of the new bushings, washers and bolts so I need to call the dealer tomorrow and hope they have them in stock. I didn't locktite those two bolts, even though I did everything else (i replaced the control arms a few weeks ago).

Anyhow, I need to find new washers, a bolt and the bushings, I figure the dealer will have the bushings in stock, or at least I hope they do and I can get a bolt and washers at the local parts joint. I'll have to pull the other side so I can match up the bolts.

Other then that I dunno how it drives with all the new parts cause I can't drive it. I sprung for the ceramic pads and good rotors, my right front caliper was stuck, which overheated everything on that side, even had a hell of time getting the bearings off as they were pretty jacked.

__________________
1984 300D Turbo 169k

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."
-----Mark Twain
Reply With Quote
  #2  
Old 12-10-2008, 10:50 AM
mobetta's Avatar
(Oo{-I-}oO)
 
Join Date: Mar 2006
Location: minnesota,hey.
Posts: 1,841
you sure the end of the sway bar didnt break off? common issue. there are a few fixes., including a new repair kit that you may be able to get from Phil. I opted to replace mine w/ new.
__________________
1984 123.193 372,xxx miles, room for Seven.

1999 Dodge Durango Cummins 4BTAA 47RE 5k lb 4x4 getting 25+mpgs, room for Seven.
Reply With Quote
  #3  
Old 12-10-2008, 10:55 AM
Registered User
 
Join Date: Nov 2008
Location: Stuart, FL
Posts: 110
Yup i was able to thread a new bolt in, everything appears to be fine in that respect, dealer didn't have any new bushings, so i had to order them.

__________________
1984 300D Turbo 169k

"Twenty years from now you will be more disappointed by the things you didn't do than by the ones you did. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover."
-----Mark Twain
Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 05:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page