![]() |
|
|
|
#1
|
|||
|
|||
Setting Transmission vacuum & modulator
1983 300CD Turbo, 199,400 miles.
I have been reading the threads on the flaring/shifting issues with the transmission here and elsewhere and started the check out of mine, this is where I am at. 1-adjusted linkage to VCV at IP to have the proper clearance at WOT 2 -Removed lines to 3-2 valve and tees, replaced tees with straight hose 3-at double tee from main line vacuum to brake booster = 20 in vacuum 4-at line to trans modulator = 10in vacuum 5-VCV vacuum starts at 10 in and drops to zero at WOT 6-Cleaned bajo bolt at intake manifold, found crud in the bolt, but little, if any, in the fitting. Cleaned out bolt. I believe I have to adjust the VCV up to get to 15 at idle, does this sound right? She is still flaring, much more at 2-3 than at 3-4, but not flaring anywher near as much. I will also recheck the trans fluid level, this time in nuetral. She was about 1/2 pint low today, so checking in uetral rather than park might change the level reading. After doing the above, I will adjust the modulator a turn CCW to see what happens.
__________________
1983 Mercedes 300CD Turbo- 199,370 miles - Lapis Blau 1974 Mercedes 240D - 186,445 miles - Aqua Blau 1982 Volvo 244GL Diesel wagon - 168,956 miles - to be sold 1994 Chevy G30 6.5 Diesel "short bus" converted for camping, painted red white & blue & white stars 78,956 miles JD F935 diesel front mower |
Bookmarks |
|
|