I have a situation on the passanger side front wheel where I have what looks like grease coming through around the center cap. I took off the center cap and the rotor cap is on tight and doesn't feel all that greasy. The outer part of the rim is not greasy so any ideas on where this is coming from? I cleaned it off and it came back.

Attached Thumbnails

 

__________________
1983 300SD
200000miles

Take the wheel off and see if the dust cap has a crack in it. Are your bearings good? I believe the grease gets more like an oil when it gets hot. Perhaps it's leaking out when it gets hot and seeps out of the dust cap and the center cap allowing brake dust to stick to it.

__________________
Chad
2013 Jeep Unlimited Rubicon
OBK#44
"Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.)

SOLD
1985 300TD - Red Dragon
1986 300SDL - Coda
1991 - 300TE
1995 - E320
1985 300CD - Gladys
2006 Nissan Pathfinder LE
1998 Acura 3.0 CL

X2 to Chad That overlooked dust cap that has been beat relentless for years with hammers. Dust caps get old and don't seal. I have also been over zelous when packing bearings and had the dust cap pop off.

__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif
15 VW Passat TDI
00 E420
98 E300 DT
97 E420 Donor Car - NEED PARTS? PM ME!
97 S500
97 E300D
86 Holden Jackaroo Turbo D
86 300SDL
(o\|/o)

I took the center wheel cap off so I could look at the dust cap and it looked ok but good point about a crack or such. I'll pull the wheel this weekend so I can get the cap off and get a better look.

__________________
1983 300SD
200000miles