thanks for the replies on my odd size line. upon further inspection i noticed that line (#3) was rubbing on # 2line and both lines are damaged but not leaking. also #1 line was rubbing and is pretty bad but not leaking.

i have seperated them with some rubber hose so no chance of them rubbing now. does anyone have some laying around that would like to sell? only need the first 3 lines (short ones) or should i not worry about it?

where can i get replacments? can a injection shop make them up and how much should i expect to pay so i dont get ripped off? are they still avaliable through the dealer?

thanks for any help. and if anyone has them to sell please let me know!

What car?

__________________
83 SD

84 CD

sorry its a 87 300sdl 603.961

thanks

You can leave the lines alone as they may never leak but you need to get the clamps that are evidently missing back on the lines.

You may have to modify the Clamp/s to fit over the Fatter line.

The clamps go a long way in preventing rubbing and failure of the Fuel Injection Hard Lines due to vibration.

__________________
84 300D, 82 Volvo 244Gl Diesel