|
|
|
|
|
#1
10-15-2013, 04:03 PM
|
|||
|
|||
|
1987 300td SLS Jug Question
Hey Guys,
Wondering if anyone can tell me how the SLS jug is supposed to secure itself at the bottom. I recently replaced the hose that runs to the pump and now it slides around. There is a rubber doughnut of some kind that wants to support it but is loose. Before I glue it down just wanted to see if anyone had the correct part or procedure to secure it. thanks,
__________________
1987 300td 240k #14 head 
|
|
#2
10-15-2013, 09:21 PM
|
||||
|
||||
|
the doughnut is part of a mount that goes through a hole in the stand under the reservoir. if all you have is the doughnut, you are missing the other half of the mount.
the nipple on the bottom of the tank goes into the grommet, and that grommet is mounted in the hole in the stand
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!!  1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
|
|
#3
10-16-2013, 08:36 AM
|
|||
|
|||
|
I assume you replaced the hose that goes from the reservoir to the pump? What kind of hose did you use? The hose on 126 is starting to leak through the material and you can see the fluid "sweat" through the hose. I looked everywhere online but unable to find a replacement so I assume I must cut and make a hose then secure with screw clamps or similar? Thanks
__________________
2001 E55 2001 E320 Sedan 2001 Subaru Legacy 2006 SLK280 2016 Subaru Outback 3.6
|
|
#4
10-16-2013, 08:39 AM
|
|||
|
|||
|
NVM, i found another post and found out I can use any type hose since it is a low pressure line. Preferably fuel hose or similar, thanks
__________________
2001 E55 2001 E320 Sedan 2001 Subaru Legacy 2006 SLK280 2016 Subaru Outback 3.6
|
|
#5
10-16-2013, 09:23 AM
|
|||
|
|||
|
I used 123 126 201 124 SLS Hydraulic Suspension Tank Supply Hose Upgrade from ************. The braided hoses start to weep over time.
Please do not list competing parts sales websites
__________________
1987 300td 240k #14 head Last edited by vstech; 10-16-2013 at 12:50 PM. Reason: typed out a competing website
|
 |
| Bookmarks |
|
|
Linear Mode
