|
|
|
|
|
#1
02-21-2014, 11:09 PM
|
|||
|
|||
|
seat removal. 1982 300d
so.
i had all my door panels off fixing my vacuum leaks. (which i did) i put my door screws on my back seat. screws went down into the seat. question how do i get the back seat out 1982 300d minsk 
|
|
#2
02-21-2014, 11:20 PM
|
|||
|
|||
|
On the lower edge of the bottom seat cushion there are two red buttons. While pushing in the buttons one at a time pull up on that end of the seat cushion and do the same thing to the other end. If you need to remove the seat back you will find two metal brackets at the lower end of the seat back on each end. These brackets are bolted to the body. Remove the bolts on each end. Open the center armrest fully. There is one bolt behind the armrest holding the armrest bracket to the body. Remove this bolt. Lift up the seat back. The seat back is hung on two metal brackets at each end.
Replacement is the reverse. On the bottom seat put it in place, line up the V shaped spring type clips on the holes near where the red buttons are located and sit down on the seat hard until you hear the click of the clip engage the hole. You may need to do one side at a time. Last edited by BWhitmore; 02-22-2014 at 10:21 AM.
|
|
#3
02-21-2014, 11:47 PM
|
||||
|
||||
|
^How I got the seat out of my old 300D. Excellent description, BW.
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco...  " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die."
|
|
#5
02-22-2014, 12:13 AM
|
||||
|
||||
|
You may want to have a small hammer, or the handle of a small screwdriver (wrapped in something soft), to hit the red buttons with to snap them free. The buttons can be VERY hard to get to move with finger-presssure alone. (Credit to Charmalu for that tip.)
Also two sets of hands is way better than one for reinstalling the seat bottom. A magnetic parts tray is very useful, but an empty coffee can or margarine tub, etc., is a real headache-avoider when working with screws or other hardware. I used to leave stuff on the carpet but apparently Mercedes carpets eat screws and washers.
__________________
 Mac 2002 e320 4matic estate│1985 300d│1980 300td Previous: 1979 & 1982 & 1983 300sd │ 1982 240d “Let's take a drive into the middle of nowhere with a packet of Marlboro lights and talk about our lives.” ― Joseph Heller, Catch-22
|
|
#6
02-22-2014, 07:18 AM
|
|||
|
|||
|
The back seat is currently out of my 240D and I can post some pictures if needed.
|
|
#7
02-22-2014, 04:52 PM
|
||||
|
||||
|
I think your owner's manual has pictures (if you have one).
__________________
"Senior Luna, your sense of humor is still loco... but we love it, anyway." -rickymay ____ "Your sense of humor is still loco... " -MBeige ____ "Señor Luna, your sense of humor is quite järjetön" -Delibes1982 300SD -- 211k, Texas car, tranny issues ____ 1979 240D 4-speed 234k -- turbo and tuned IP, third world taxi hot rod 2 Samuel 12:13: "David said to Nathan, “I have sinned against the Lord.” And Nathan said to David, “The Lord also has put away your sin; you shall not die."
|
|
#10
02-24-2014, 11:38 PM
|
|||
|
|||
|
Here's the pdf on how to remove the seat bottom.
http://mercedes.thatchermathias.com/w123CD2/Program/Chassis/91-170.pdf
__________________
|
 |
| Bookmarks |
|
|
Linear Mode
