Quote:
Originally Posted by ykobayashi
If you find C146 on your W126 SD post a photo. I'm still looking for it. I cannot find any plug with a vi/w wire.
Tonight my remote switch stopped working. I can still start the car by jump wring the screw terminals on the firewall no problem.
I decided to pull my ground strap and give it a good inspection and cleaning. It was pretty dirty and I got the terminals and washers nice and shiny. No luck. Same click issue with the key and remote switch.
As for the remote starter button my guess is the 10' of #16 wire is too much resistance a long with the fuse and switch contact resistance. The 1" jumper wire (a banana Jack) works fine on the screws.
|
Sorry, There was no year/ model in the title so I falsely assumed it's a 300D. For 84 SD the info is not that different. C146 is a 6 pin connector in driver's foot well to the top right of the accelerator pedal.
NSS is on C146:
2.5 VI/WT pin 5
4 VI pin 6.
2.5 & 4 is the gauge of the wires
08-23-2016, 09:24 AM
Threaded Mode
