Guys, hope you all can provide some suggestions as I am quickly running out of ideas to cure a bad pull in my 500e. The car has 43k on the clock and pulls hard to the right. There has been no body damage or under carriage problems under my watch. The control arms have been replaced on both sides before I bought the car. It has been aligned by 3 different places; 2 dealers and 1 indy and it doesnt seem to fix the problem. I know the new E class has a problem with pull and thats traced back to a bolt in the control arm. I am not sure it is the same issue or there is any relation. I have 19"x8.5 on the front but I have also run with the stock rims and tires and it seems to be the same result of a pull.

Any help would be appreciated. Thoughts?

Thanks

__________________
Mark
92 500e Spruce/Parchment (41k)
95 E320 Cab Cabernet/Parch (30K)
94 LS 400 Anniv Ed (traded on 500e)
85 Toyota Supra (103k)
90 Toyota 4Runner (56K)
------------------------------------------------
Sometimes you have to put your foot down to get a leg up